info@chinagwx.com

GWX

Endurance plate impact resistance?

by:GWX     2020-09-01
Endurance plate impact resistance for how many times of common glass
( 1) Transmission of light: P C plate light transmittance as high as 89%, equivalent to that of glass Bi beauty. UV coating plate blasting bask in the sun won't produce yellowing, atomization, pervious to light, the transmission loss is only 6%, after ten years of PVC turnover rate is as high as 15%, 20%, glass fiber is 12% 20%.

  ( 2) Resistance to impact, the impact strength is common glass - 250 300 times, 30 times that of the same thickness of acrylic, is 2 - tempered glass 20 times, the following two meters with 3 kg hammer drop no crack, there are 'no broken glass' and the 'ring of steel' laudatory name.

  ( 3) Light weight: the weight is only half of the glass, save transportation, unloading, installation and support framework cost.

  ( 4) Flame retardant: national standard GB50222 - 95 confirmed that the PC board is difficult level, namely the B1 level. Ignition point is 580 degrees Celsius, PC board itself from the self-extinguishing fire, burning will not produce poisonous gas, don't feed the fire from spreading.
( 5) PC board side coated uv uv protection: ( UV) Coating, on the other side has the condensing processing, anti-ultraviolet radiation, insulation did prevention functions in one. Can block ultraviolet light through, and is suitable for protecting valuable works of art and exhibits, make it from uv damage, uv protection ( UV) Protective film solar radiation has clear the harm to the polymer materials, can produce fine lines caused by the surface degradation. These fine lines are susceptible to water, dust and water chemical and erosion. These on the influence degree of the polymer is largely dependent on environmental parameters such as geographical location, altitude and seasonal change, etc. The plate has a one-sided or two-sided uv protective layer, has the good outdoor corrosion resistance performance. This unique protection to ensure long-term under the intense ultraviolet light irradiation, still can use for a long time and keep its optical properties, compared with other thermal plastic material.

  ( 6) Flexible, can be in accordance with the design adopts cold bending method, at the site installation arched, semicircular roof and Windows. Minimum bending radius of the plate thickness of 175 times, hot bending.

  ( 7) Sound insulation sex: PC board sound insulation effect is obvious, than an equivalent thickness of the glass and the strength plate has better sound, sound insulation, the thickness under the same conditions, the PC board of sound insulation quantity higher than that of glass 3 - 4 db。 In the world is the first selection of highway noise barrier material.

  ( 8) Energy saving: Xia Tianbao cool, heat preservation in winter, PC board has more lower than common glass and other plastic thermal conductivity ( K value) , 7% higher than the same glass - insulation effect Heat up to 49% 25%, the PC board. So that the heat loss is greatly reduced, used to have a warm equipment construction, environmental protection material.

  ( 9) Temperature adaptability: PC board in - 100 c does not occur when cold short, not soften in 135 degrees Celsius, its mechanics in the harsh environment, mechanical properties, etc. No obvious change.

  ( 10) Weather: PC board can be - 40 ℃ to 120 ℃ scope to keep the stability of the physical indicators. Artificial climate ageing test 4000 hours, yellowing degree is 2, light transmittance lower value only 0. 6%.

  ( 11) Prevent dewing: outdoor temperature 0 ℃, indoor temperature is 23 ℃, the indoor relative humidity under 80% when, the inner surface of the material not condensation. Transmission of light
colorless transparent endurance plate has high light transmittance, transparency will not be reduced by using time. Colouring endurance plate can blocking the strongest part of the sun, make through the light is downy.
form sheet for commonly used specifications of light transmittance, the thickness of the product ( mm) Color light transmittance ( ±3%) Endurance plate 4 transparent 80 endurance plate 6 8 transparent transparent 79 endurance plate 78 endurance plate 10 transparent plate 1 77 endurance. 5 transparent 88 endurance plate 2 transparent board 4 87 endurance plate 3 transparent 86 endurance. 5 transparent 84 endurance plate 6 82 transparent anti-ultraviolet function.
endurance plate surface by high-tech UV UV special craft processing, can guarantee the stability of product of ultraviolet (UV) radiation. This product has a long weatherability, prolonged use still maintain the optical performance of the product itself, is not easy to rapidly aging by ultraviolet irradiation. So hollow plate except for use in general building materials, more suitable for the advertising material.
Guangdong Guoweixing Plastic Technology Co.,Ltd has various branches in different countries worldwide.
Providing highly qualified APPLICATION products and services, Guangdong Guoweixing Plastic Technology Co.,Ltd is committed to helping clients make lasting improvements to their performance and realize their most important goals. Over the past decades, we’ve built a firm uniquely equipped to this task. Go to GWX Solid Polycarbonate Sheet for more info.
Guangdong Guoweixing Plastic Technology Co.,Ltd, a manufacturer of APPLICATION, might emphasize less hassle or less wasted time rather than emphasizing reliability or quality.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...