PC endurance plate plate installation
PC endurance plate can be installed according to the bending configuration bending, but PC endurance plate bending radius should not less than the small bending radius, so introduced by bending stress will not have influence on the mechanical properties of the PC endurance plate. PC endurance plate must be installed along the length direction, cannot be installed along the width direction.
cold bending, the bending direction should be perpendicular to the direction of PC endurance plate edge reinforcement, PC endurance plate cold bending radius is more than 100 times the plate thickness ( In view of the 3 mm below) More than 3 mm PC endurance plate cold bending radius 175 times greater than the plate thickness. 。 Cold bending radius calculation formula:
R = ( 1/2) h+m2/( 8h) R = bending radius h = high arch span of m =
endurance plate has the characteristics of good toughness and the cold bending, can be designed into their respective arch structure, its limit radius of curvature radius is larger than the PC board. The following table gives the part specifications and the limits of endurance plate curvature radius.
endurance plate small bending radius values ( 3 mm below the small bending radius is 100 times that of the plate thickness, more than 3 mm of thickness of the board of small bending radius is 175 times)
- — To become endurance plate manufacturers
related products knowledge introduction, please click on the endurance plate installation or counseling online customer service, the service hotline:
Guangdong Guoweixing Plastic Technology Co.,Ltd has a great reputation on producing innovative products as the APPLICATION.
Guangdong Guoweixing Plastic Technology Co.,Ltd attaches great importance to customers and assists them in achieving their demands.
Guangdong Guoweixing Plastic Technology Co.,Ltd always focus on the situation of global market and understands the importance factors of manufacturing APPLICATION.
Guangdong Guoweixing Plastic Technology Co.,Ltd have significantly changed the way customers approach manufacturing. APPLICATION can still compete if we are willing to change the ways in producing.
We are professional in manufacturing APPLICATION, and always emphasize the technology and quality during the producing procedure.